Nokia CK-20W Manual De Instrucciones página 12

To charge the battery in your compatible Nokia phone while using the car kit,
connect the phone through a charging cable to the car kit.
Before you can connect your phone to the car kit using Bluetooth technology,
you must associate (pair) the car kit with the phone. Do as follows:
1. Switch on the phone and the car kit (see p. 9).
2. Activate the Bluetooth feature on your phone, and set the phone to search for
Bluetooth devices. See the user guide of your phone for instructions.
3. Select the car kit (Nokia CK-20W) from the list of found devices.
4. Enter the Bluetooth passcode 0000 to pair and connect the car kit to your
phone. In some phones you may need to confirm the connection after pairing.
See the user guide of your phone for details. You only need to pair the car kit
with your phone once.
If the pairing is successful, the car kit sounds a high beep and appears in the
phone menu where you can view the currently paired Bluetooth devices. The car
kit is now paired with and connected to the phone and ready for use. If the
pairing fails, the car kit sounds a low beep. Try to pair again by carefully following
the pairing instructions.
You can pair the car kit with up to eight phones and music players in total but
connect it to only one phone and one music player at a time.
The car kit can connect to a paired phone only if the phone is switched on and
has the Bluetooth feature activated.
Connect the car kit manually
When the car kit is switched on and you have not connected a phone to it, you
can set the car kit to search for paired phones.
To start the search, press and hold the Navi wheel for about 1 second. During the
search, the indicator light of the input device flashes. The car kit first tries to
connect to the phone that was used with it most recently. If this fails, the car kit
tries to connect to one of the other Bluetooth devices that have been most
recently paired with it. The car kit beeps when it connects to the phone.
Connect the car kit automatically
You can set your phone to allow an automatic connection with the car kit when
the car kit is switched on. To do this in Nokia phones, change your paired device
settings in the Bluetooth menu.
When you switch on the car kit and no phone is connected to it with a cable,
within 45 seconds, the car kit tries to make a Bluetooth connection to the last
G e t s t a r t e d
11