Connection Options; Cable Connection; Bluetooth Connection - Nokia CK-20W Manual De Instrucciones

I n s t a l l a t i o n
When mounting a mobile holder, ensure that the phone display is clearly
visible for the user.
• Your service technician or dealer may be able to provide you with information
on alternatives for mounting the equipment suitably in your vehicle without
requiring bore holes.
• Do not smoke when working on the car. Ensure that there is no source of fire
or flame nearby.
• Take care not to cause damage to electrical cables, fuel or brake lines, or
safety equipment during installation work.
• RF signals may affect improperly installed or inadequately shielded electronic
systems in motor vehicles such as electronic fuel injection systems, electronic
antiskid (antilock) braking systems, electronic speed control systems, and
airbag systems. Should you notice a fault or change in the operation of such a
system, contact your car dealer.
• Ensure that cables are placed so that they will not be subject to mechanical
wear and tear (for example, not laid under car seats or over sharp edges).

■ Connection options

The car kit can be connected to a compatible mobile phone or music player using
a cable or Bluetooth wireless technology. Audio connection can be made
between the car kit and a compatible car radio system in several ways.

Cable connection

The car kit can be supplied with several connectivity cables that have different
plugs. The cables can have, for example, a Pop-Port
3.5-mm audio plug. Select the cable according to the devices that are used with
the car kit. For more information about the cables, see Connectivity cables p. 27

Bluetooth connection

For a Bluetooth wireless connection, the user needs a compatible mobile phone
supporting Bluetooth technology. For more information, see p. 10 and 20.
20
TM
plug or a charging and a