Input Device - Nokia CK-20W Manual De Instrucciones

Ocultar thumbs Ver también para CK-20W:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

I n s t a l l a t i o n
Do not mount the hands-free unit inside a metal housing or on a metal surface
because this will impair the Bluetooth connection between the hands-free unit
and the Bluetooth device that is connected to the car kit. For an optimal
connection, ensure that the distance between the hands-free unit and a metal
surface is over 4 mm (0.16 inch).
To mount the hands-free unit, use the hook and loop tape pads supplied with the
car kit in the same way as with the input device (see the figures in Input device
starting from p. 24). Detach the two pads from each other. Attach the pad with
the loops first: peel off the protective sheet from the adhesive side, and attach
the pad to the desired location in the car. Ensure that the surface where you
attach the pad is dry and free from dirt and dust.
To attach the pad with the hooks, peel off the protective sheet from the adhesive
side, and attach the pad to the underside of the
hands-free unit.
Press the hands-free unit firmly onto the loop pad, and check that the hands-free
unit stays securely in place.

Input device

The input device should be located so that it is within easy reach of the user.
When installing the parts of the car kit ensure that none of them interfere with or
hinder the steering or braking systems or other controls or systems used in the
operation of the vehicle (for example, airbags).
Ensure that the input device cable reaches to the hands-free unit for connection.
The best location to mount the input device is horizontally on the console
between the driver's and front passenger's seat so that the input device keys are
toward the front of the vehicle.
To mount the input device, use the hook and loop tape pads supplied with the car
kit. Detach the two pads from each other (1). Attach the pad with the loops first:
peel off the protective sheet from the adhesive side (2), and attach the pad to the
desired location in the car. Ensure that the surface where you attach the pad is
dry and free from dirt and dust.
24

Publicidad

Tabla de contenido
loading

Tabla de contenido