Cleaning And Descaling; Descaling - Boneco U310 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

12
CLE ANING AND DESCALING
en

DESCALING

If stubborn limescale deposits form at the bottom of the
BONECO U310, the appliance must also be descaled in
addition to the cleaning. For this process, use the pro-
vided "EZCal" descaling agent. You can get replacement
parts at your BONECO specialist dealer or at the online
store under
shop.boneco.us
1.
Disconnect the BONECO U310 from the power outlet.
The unit must always be unplugged from the power
outlet before draining it. Failure to do so can result in
electric shock and pose the risk of severe or fatal
injury!
2. Empty the water tank.
Tip the long side of the BONECO U310 towards the
sink (with the viewing window facing down). This
prevents water from getting into the air outlet and
damaging the unit.
3. Remove the A250.
4. Mix 1 bag of EZCal with 32 oz. (1 liter) of water and
pour the mixture into the water tank, one half to the
left and right each.
5. Wait 30 minutes to allow the solution to take effect.
6. Rinse the water tank with tap water. Remove re-
maining lime residue, if any, using a scrub brush.
7.
Rinse the inside of the water tank with fresh tap water.
8. Reinsert the A250.

Publicidad

Tabla de contenido
loading

Tabla de contenido