Fagor LFA-073 IT Manual De Instruciones Y Mantenimiento página 20

4
SELECTING ADDITIONAL FUNCTIONS
The wash functions must always be selected after choosing the wash program. Any change
of program during selection cancels out the previously selected functions.
These functions allow specific adjustments on the wash load, timing and consumption.
The additional functions depend on the model:
Button: Time delay
Allows you to delay wash
start. There are models
which can delay the wash
by 3, 6 or 9 hours. In this
case, pressing the time
delay button lights up a
pilot light showing the
selected option.
In other models, you can
choose the time you wish
to delay the wash from 1
to 9 hours with 1 hourly
intervals. Ideal to make
the most of economy
electricity at night. For
these models, pressing
the time delay button, the
display will show how
many hours you wish to
delay the wash start.
I M P O R TA N T
If the program is
changed or the ON
/ OFF button is
pressed whilst
additional functions
are being selected,
all selected functions
are cancelled.
Button: Top / Low
load
This uses only half the
dishwasher capacity. Top
Load, in the top rack for
more delicate pieces, and
Low Load, in the low rack,
for very dirty pans or
dishes. Valid for all
programs.
ECOLOGICAL WASHING
If the model has an Eco-Sensor, 25% of water can be saved using the Intensive
or Normal program. The Eco-Sensor detects how dirty the pre-wash water is and,
if clean enough, reuses it for the wash.
English
19