Installing The Sim Card; Starting The Device - Crosscall CORE-M4 GO Guia De Inicio Rapido

Thank you for choosing Crosscall and for buying this smartphone!
The quick start guide will show you how to get started with your
new device.

INSTALLING THE SIM CARD

1. Eject the drawer using the sim card eject tool provided.
Insert the tool into the hole, as shown below, to eject the drawer
from its slot.
2. Pull out the tray completely
3. Insert the SIM card, face down in the smallest compartment.
If you wish, insert a second SIM card or a 256 GB max. micro SD
card.
4. Slide the tray back into the phone, with the metal side facing
upwards.
Warning: to ensure that your smartphone is waterproof, make sure
that the tray is fully inserted and locked.
CHARGING:
Be sure to fully charge your phone before you use if for the first
time with the charger supplied.
It is preferable to use the cable and charger supplied with your
phone. Other cables and chargers may have a detrimental effect
on the life of the battery.
N.B.: Phone not compatible with a USB-type C cable/type-C USB.

STARTING THE DEVICE:

To switch on the device, press the On/Off button for a few seconds.
12