Descargar Imprimir esta página

Correct And Proper Use - ProMinent DULCOTEST CLB1-mA-10ppm Instrucciones De Montaje Y Funcionamiento

Publicidad

Idiomas disponibles

Idiomas disponibles

Introduction
CAUTION!
Prerequisites for operation
Possible consequence: Slight or minor
injuries, material damage
The sensor may only be used with
ProMinent type DLG III or DGM flow
gauges. Only in this way can the flow
parameters be maintained
There must be a free outlet or at most
a counter pressure of 1 bar at the
outlet of the flow gauge
The sensor's voltage supply may not
be interrupted
Following longer interruptions to the
voltage supply (> 2 h), allow the
sensor to run-in again and recalibrate
it
1.4

Correct and Proper Use

NOTICE!

Correct and Proper Use

The sensor may only be used to
determine and regulate concentra‐
tions of free chlorine
The sensor may not be used in con‐
junction with organic chlorine com‐
pounds, such as trichloroisocyanuric
acid, or stabilisers, such as cyanuric
acid
Any other uses or modifications to the
system are prohibited
The sensor is not a safety component
34

Publicidad

loading