Stanley SG6115 Manual De Instrucciones página 24

Ocultar thumbs Ver también para SG6115:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

ENGLISH (Original Instructions)
INTENDED USE
Your STANLEY Small Angle Grinder SG6115 and SG7115 
have  been  designed  for  grinding  and  cutting  applications 
using the appropriate type of disc. These tools are intended 
for professional use.
SAFETY INSTRUCTIONS
The definitions below describe the level of severity for each 
signal word. Please read the manual and pay attention to 
these symbols.
DANGER:  Indicates  an  imminently  hazardous 
situation  which,  if  not  avoided,  will result in
death or serious injury.
WARNING:  Indicates  a  potentially  hazardous 
situation  which,  if  not  avoided,  could result in
death or serious injury.
CAUTION:  Indicates  a  potentially  hazardous 
situation  which,  if not avoided, may result in
minor or moderate injury.
NOTICE: Indicates a practice not related to personal injury 
which, if not avoided, may result in property damage.
Denotes risk of electric shock.
Denotes risk of fire.
Warning: To reduce the risk of injury, read the        
                instruction manual.
General power tool safety warnings
WARNING!
Read
instructions, illustrations and specifications
provided with this power tool. Failure to follow 
all instructions listed below may result in electric 
shock, fire and/or serious injury. 
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless) 
power tool.
1. Work area safety
a. Keep work area clean and well lit. Cluttered or dark 
areas invite accidents.
b. Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power  tools  create  sparks 
which may ignite the dust or fumes.
c. Keep children and bystanders away while
operating a power tool. Distractions can cause you 
to lose control.
2. Electrical safety
a. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk 
of electric shock.
b. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
24
all
safety
warnings,
refrigerators.  There  is  an  increased  risk  of  electric 
shock if your body is earthed or grounded.
c. Do not expose power tools to rain or wet
conditions. Water entering a power tool will increase 
the risk of electric shock.
d. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase 
the risk of electric shock.
e. When operating a power tool outdoors, use an
extension cord suitable for outdoor use.  Use  of 
a  cord  suitable  for  outdoor  use  reduces  the  risk  of 
electric shock.
f. If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of 
electric shock.
3. Personal safety
a. Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication.
A  moment  of  inattention  while  operating  power  tools 
may result in serious personal injury.
b. Use personal protective equipment. Always wear
eye protection. Protective equipment such as a dust 
mask,  non-skid  safety  shoes,  hard  hat,  or  hearing 
protection used for appropriate conditions will reduce 
personal injuries.
c. Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your finger on the 
switch or energising power tools that have the switch 
on invites accidents.
d. Remove any adjusting key or wrench before
turning the power tool on. A  wrench  or  a  key  left 
attached to a rotating part of the power tool may result 
in personal injury. 
e. Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power 
tool in unexpected situations.
f. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair and clothing away from
moving parts. Loose  clothes,  jewellery  or  long  hair 
can be caught in moving parts.
g. If devices are provided for the connection of dust
extraction and collection facilities, ensure these
are connected and properly used.  Use  of  dust 
collection can reduce dust-related hazards.
h. Do not let familiarity gained from frequent use of
tools allow you to become complacent and ignore
tool safety principles. A  careless  action  can  cause 
severe injury within a fraction of a second.
4. Power tool use and care
a. Do not force the power tool. Use the correct power
tool for your application. The correct power tool will 
do the job better and safer at the rate for which it was 
designed.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Sg7115

Tabla de contenido