Kit Assembly - Metra 95-7362B Instrucciones De Instalación

1. Secure the radio brackets to the radio
with the screws included with radio.
(Figure A)
2. Locate the factory wiring harness
and antenna plug in the dash. Metra
recommends using the proper mating
adapters from Metra and/or AXXESS.
3. Secure the assembly into the sub dash.
(Figure B).
4. Reassemble the dash in the reverse
order of disassembly using the radio
trim panel instead of the factory panel.
(Figure B)

KIT ASSEMBLY

(Figure A)
(Figure B)
3
REV. 4/25/2018 INST95-7362B