Change Of Set Points; Time Band Setup Procedure; Change Language; Change Date And Time - Daikin UATYA-BBAY1 Manual De Instalación, Uso Y Mantenimiento

4.8.3

Change of set points

The "Menu" icon provided in the main screen leads to the main menu page.
Go to the "Setpoint" sub menu and select the function whose setpoint is to be changed.
Scroll the parameters until the desired parameter setpoint is achieved.
Select the setpoint parameter to enable the edit keypad.
Set the new value and apply the green tick to confirm.
4.8.4

Time band setup procedure

Access to the screen where the time bands are set up requires entry of a password.
On the main mask press the "Menu" icon to access the main menu and then the "Parameters" menu.
Within the "Parameters" sub-menu, it is is possible to access the function "ES - Energy saving" to set the parameters
of the time schedules.
Select the desired parameter to activate the keyboard to change it.
Set the new value and apply the green tick to confirm.
4.8.5

Change language

On the main mask press the "Menu" icon to access the main menu, within the "Language" menu it will be possible to
select the desired language among the available ones.
If the language you are looking for is not in the screen, use the arrows to find it.
The selected language becomes active as soon as it is selected.
4.8.6

Change date and time

Select "Date and Time" in the "Configurations" menu and access the screen where it is possible to edit the date and
time setpoints.
Select the write icon in the bottom right-hand side to access the edit screen.
When a green value is tapped, a virtual keypad appears: use the keypad to set the new values. After entering the
new value, tick it to confirm it.
After changing the values, tap the Save icon on the bottom right-hand side to save the new setpoints.
The arrow on the left is used to go back to the previous screen without saving the changed parameters.

4.9 Wiring diagram

The wiring diagram is an essential part of the documentation and is present inside each unit.
It is essential to refer to this document if you are unsure about anything or need further explanations regarding the
auxiliary electrical connections and power connections as well as for the electrical specifications.
In particular, refer to the wiring diagram as regards the possibility of remotely managing the functionalities that
contemplate this.
We reserve the right to make changes without any prior notice.
UATYA
4P645202-1
Translation from original instructions
Packaged Rooftop
33