Conditions Of Use - Festo SLTE Serie Instrucciones De Utilizacion

SLTE−...
4

Conditions of use

Warning
S Carry out the initial commissioning of
the drive system with reference travel
and low torques and masses.
In this way you will prevent sudden un
controlled movements. Low speeds are
specified with the reference travel.
Please note
Dust particles in the drive rod bearing can, under circumstances, cause the
drive rod to jam.
S Make sure that the maximum concentration of dust for complying with the
permitted IP protection class is not exceeded (see Technical Specifications).
Please note
The SLTE−... may be damaged if the slide is moved manually at an excessively
high speed.
S Make sure that the max. permitted speed is not exceeded when the slide is
pushed manually (see Technical Specifications).
The SLTE−... may be damaged if it strikes the end position at an excessively
high speed.
Please note
Malfunctions will occur if the device is not used correctly.
S Ensure that the specifications in this chapter are always observed.
Only in this way can you ensure that the product functions correctly and
reliably.
24
0
Fig. 3
Festo SLTE−... 0501NH English
max.
mm
s