Siemens 1FK6 Instrucciones De Servicio página 214

Connecting-up
X533 X533
X9
(X534)
X533
7-18
The Safe STOP option comprises the safety relay and the terminals for
the relay control and a checkback contact.
Terminal Designation
X533.1 K1.11
X533.2 K1.12
X533.3 K1.a
X533.4 P24
Connectable cross-section: 1.5 mm
When installed, terminal 4 is situated at the top front of the unit (see Fig. 7-1 to
7-3).
Table 7-18 Terminal assignment for option K80
Exception: Units up to a housing width of 90 mm and Z option K80
with product version
• B to D for P50 units,
• A to C for P70 units.
See the following diagram for terminal assignment.
For P50 units with product version A no option K80 is
available.
Terminal Designation
X533.1 K1.11
X533.2 K1.12
X533.3 K1.a
X533.4 P24
X9.2 + 24 V
X9.1 0 V
Connectable cross-section: 1.5 mm
X9: When installed, terminal 2 is situated at the top front of the unit.
X533: When installed, terminal 1 is situated at the top front of the unit.
(see Fig. 7-1 to Fig. 7-3)
Table 7-19 Terminal assignment for option K80
Meaning
NC contact
NC contact
control terminal
24 V voltage
2
(AWG 16)
Meaning
NC contact
NC contact
control terminal
24 V voltage
external 24 V supply
reference potential
2
(AWG 16)
6SE7087-8JP50
Operating Instructions SIMOVERT MASTERDRIVES
08.2008
Range
Imax = 1 A
24 V
DC 24 V
Range
Imax = 1 A
24 V
DC 24 V
DC 18 V - 30 V
DC 18 V - 30 V
Siemens AG