KTM 60712929000 Manual Del Usario página 16

- Remove locking unit.
- Remove pin .
- Remove rocker arm .
- Remove screws .
- Remove cover with springs.
NOTE
Ensure the springs remain in place.
- Remove plug .
- Key position upwards .
- Press snap-in plate into the locking cylinder.
- Remove locking cylinder.
Key must remain in the locking cylinder!
Installing lock
- Mount O-ring .
- Position locking cylinder as shown in the fi gure and insert with the
aid of the key (catch must face downward).
Snap-in plate engages.
16