- Fit plug
.
- Key position: 90° to the right
- Mount cover with springs.
NOTE
Ensure that the springs are seated correctly on the relevant holding
lugs.
- Position rocker arm
with spring facing upward.
- Fit pin
.
- Mount and tighten screws
- Key position upwards
.
- Mount locking unit.
The spring must be fi xed to the relevant recess (see arrow)!
- Key position: 90° to the right
- Mount and fi rmly tighten screws
- Mount and fi rmly tighten screws
- Mount and fi rmly tighten screws
- Mount springs on both sides of the relevant holding lug.
- Mount lever
on both sides.
NOTE
Ensure the levers and springs are seated properly and that all hold-
ing lugs are correctly hooked in (see arrow).
.
.
.
.
.
.
17