Water Hardness - Pando PHTV-942 Manual De Uso

INOXPAN S.L.

3.1. WATER HARDNESS

 After setting the clock, you need to set the water hardness.
 The Water Hardness option appears on the display.
 To change the option rotate the right control.
 Press to confirm the option.
 If you wish to modify the water hardness, after the first settings, rotate the left control to the position
corresponding to the Steam function
 Rotate the right control until the Water hardness symbol
 Press to confirm the option,
 Rotate the right control to select the desired water hardness.
 Press to confirm.
Type
Ca + Mg
(ppm)
SOFT 0 a 150
MEDIUM 151 a 350
HARD 501 a 500
Water hardness
English French German
deg. [°eH] deg. [°fH] deg. [°dH]
0 a 11 0 a15
12 a 25 16 a 35 9 a 20
26 a 35 36 a 50 21 a 28
.
appears on the right side of the display.
WARNING
In the event of power failure, the water
hardness settings will be erased. Reset it
0 a 8
and program again after power restore.
EN - 7