Cleaning And Maintenance - Pando PHTV-942 Manual De Uso

Tabla de contenido

Publicidad

If the electrical connection is done through a plug and this
remains accessible after installation, then it is not necessary
to provide the mentioned separation device.
Protection against electric shock must be provided by the
electrical installation.
WARNING! The oven must be earthed.
WARNING! The appliance is intended to be built in. Please
refer to the last pages of this user manual for detailed
information on the installation dimensions.

Cleaning and Maintenance

WARNING! Cut the power supply before cleaning and
maintenance.
The appliance should be cleaned regularly and any food
deposits removed.
Failure to maintain the appliance in a clean condition could
lead to deterioration of the surface that could adversely
affect the life of the appliance and possibly result in a
hazardous situation.
Do not use harsh abrasive cleaners or sharp metal scrapers
to clean the glass door since they can scratch the surface,
which may result in shattering of the glass.
Do not use a steam cleaner to clean the appliance.
The door contact surfaces (the front of the cavity and the
inside part of the doors) must be kept very clean in order to
ensure the oven functions correctly.
Please follow the instructions regarding cleaning in the
section "Oven Cleaning and Maintenance".
WARNING: Ensure that the appliance is switched off before
replacing the lamp to avoid the possibility of electric shock.
Please refer to the chapter "CHANGING THE OVEN LIGHT
BULB".
8

Publicidad

Tabla de contenido
loading

Tabla de contenido