Setting The Language For The Voice Messages - ABB M21311P1-A Manual Del Usuario

ABB-Welcome
Technical specification
Work 125KHz
frequency
Standard ISO18000-2
Support EM4100, EM4205, EM4305, EM4450, TK4100, T5567
card
5.4

Setting the language for the voice messages

When outdoor station power is on;
1.Set outdoor station address as "0" and switch all the dip-switches to "ON."
2. Long-press the 1st button for 3s to play the voice message.
If in English, an "English" voice will be played.
If in French, a French voice will be played.
If "DI" is played, it means the voice synthesis function is disabled.
3. Short press the 1st button to change the language.
4. After choosing desired language, long-press the 1st button to save and exit.
|
— 13 —