Tire Pressure - Nogueira VMN 4.0 Manual De Instrucciones

C) Drawing out the cover (5) of the tube.
D) Lubricate the inner end of the driveshaft tube and bar with
good quality grease.
E) Replace the cover (5) and secure it with the circular locks (4).
F) With PTO upright, slide the "skirts" (3) to its original position.
Align the greasing of the "skirts" to the existing tip in circular locks.
G) Grease the tip of the circular locks (4).
Incorrect or insufficient lubrication will result in
overheating of bearings, along with the locking and
breaking of the PTO, which can cause serious injury to
people nearby.

Tire Pressure

The correct sizing of the tires is critical to increasing their useful life.
Check the pressure every 50 working hours or weekly. If necessary, calibrate the tires are cold as
detailed below.
10.5/65-16 RA 28 8 ply
28
Correct
Type of Tire
Operation Technical Manual
Excessive
Low
Recommended Pressure
44 PSI (3 bar)
3
2
4
5
4
3