Elevation; Safety Standards - Nogueira VMN 4.0 Manual De Instrucciones

Elevation

Use only the four hooks found within the four corners of the upper
carriage compliance with the details of the scheme to the side and
performing operations with adequate equipment, depending on the
weight indicated in the manual.

Safety Standards

- The instructions in this manual and those posted directly on the mixer,
in particular those relating to security, should be read carefully.
- Staff who makes any kind of intervention throughout the life cycle must have rigorous technical
expertise, specific training and experience and recognized by specific sectors where the equipment is
installed and know how to use the necessary tools for work and protective equipment equipment (PPE)
appropriate according to D. Lgs. 626/94. Failure to observe these requirements may result in risks to
safety and health of people.
- Use the mixer for the purposes specified by the manufacturer. The use of the mixer improperly can
cause risk to safety and health of people and economic losses.
- Keep the mixer unit at its maximum efficiency by following the maintenance schedule provided. Good
maintenance will get better performance, a work activity over a long and constant maintenance of
safety items.
- To perform maintenance work in areas difficult to access or dangerous, the technical precautions
have been taken to safety for himself and for others in accordance with the laws of safety.
- All maintenance, inspection and repairs must only be done by a technician, aware of the risks
involved. It is therefore necessary to predict the operating procedures for the entire machine, suitable
for administration of the hazards that can be presented and methods to prevent them. The coach must
always work with great care, paying close attention in observance of safety standards.
- At work, use only clothing and / or appropriate personal protective devices listed in the instructions
provided by the manufacturer and those provided for in laws relating to safety.
- Replace worn by original spare parts. Use oils and greases recommended by the manufacturer.
- Do not dump polluting materials into the environment. Dispose of the laws on the matter.
- Having made the replacement of the lubricant, you should proceed to clean the surfaces of the mixer
unit and the floor near the area of intervention.
8
Operation Technical Manual