1- Coupling The Harvester In The Side Position - Nogueira FTN-1900 Manual De Instrucciones

4. Preparation
4.2.4- Coupling the harvester in the side position
The harvester leaves the factory with the tractor coupling arm folded (rear
position). Observe the following instructions to place it in the working position
(side).
REAR POSITION
Loosen the jam nut (A), the tensioner (B)
1.
and remove the pin (C);
Articulate the arm (D) to the side;
2.
Secure the arm in this position using the
3.
two tensioners (E);
44
SIDE COUPLING
Instructions Manual
C
D
E
E
B
A