GYS STARTIUM 330E Manual Del Usuario página 17

Translation of the original instructions
STARTIUM 330E
12V
20-75Ah
Charge 1
(5A)
40-150Ah
Charge 2
(10A)
60-225Ah
Charge 3
(15A)
100-375Ah
Charge 4
(25A)
Three indicators show that the battery is charging :
- The charge LED (n°7).
- The display : It alternates between the battery voltage and the percentage of charge (an evolution of both values
should be noticed).
- The voltage and percentage LEDs (n°4 and 5). They remain on and alternate at the same time as the display.
The charge progression is shown in percentage (%).
% Battery charge level
0% Battery charge level
25% Charge start
50% Charge at 50%
75% Charging the remaining %
100% Charged battery
◊ Blocked and charge stop.
The battery charge does not start when :
- The battery voltage is inferior to 1V.
- The battery voltage does not match the voltage that is selected on the charger.
The battery charge stops when :
- The START/STOP button is pressed again.
- The continuous charge duration reaches 16h.
Once the battery is charged, the STARTIUM performs a floating/maintenance charge. The charge
does not stop to compensate for self-discharge and maintain the battery at a 100%.
If it is a sealed battery and if the liquid boils, it means the battery is damaged. Is this occurs, it is
recommanded to stop the charge to prevent any risk of explosion.
- The charger will stop if the « automatic restart » has not been activated.
◊ Automatic restart feature:
In the event of a power cut :
- During a normal charge, the STARTIUM switches off. When it switches back on, it does not resume the charge. It
must be manually resumed.
- During a charge with the «Automatic restart» feature on, the STARTIUM switches off. When it switches back on, it
automatically resumes the charge.
To use the «Automatic restart» mode :
- Connect the charger according to the instructions,
- Choose the charging speed and the battery type with respect to its characteristics,
- Then keep the START/STOP button pressed (> 5 seconds).
An indicator helps to check if the charge is indeed in «Automatic restart» mode :
- The voltage and percentage LEDs (n°4 and 5). They do not stay on but will blink.
In this mode, Press the START/STOP button to stop the charge.
A power supply cut will not stop the charge from resuming.
STARTIUM 330E / 480E / 680E / 980E
STARTIUM 480E
24V 12V
20-75Ah 20-75Ah
(5A) (5A)
40-150Ah 60-225Ah
(10A) (15A)
60-225Ah 130-450Ah
(15A) (30A)
85-300Ah 170-600Ah
(20A) (40A) (boost) (30A) (boost)
STARTIUM 680E
24V 12V
20-75Ah 20-75Ah
(5A) (5A)
40-150Ah 60-225Ah
(10A) (15A)
60-225Ah 130-450Ah
(15A) (30A)
130-450Ah 200-675Ah
(45A) (boost)
Phase
Testing phase
Boost
Absorption
Floating
STARTIUM 980E
24V 12V
20-75Ah 20-75Ah
(5A) (5A)
60-225Ah 85-300Ah
(15A) (20A)
100-375Ah 170-600Ah
(25A) (40A)
150-525Ah 210-750Ah
(35A) (boost) (50A) (boost)
EN
24V
20-75Ah
(5A)
60-225Ah
(15A)
130-450Ah
(30A)
150-525Ah
(35A) (boost)
17