<Functions controlled by the MAKE/TRIGGER system>
Display
Functions to be controlled
TALLY SEL
Selects the color of the tally lamp.
SDI 1
Changes the input to "SDI 1."
SDI 2
Changes the input to "SDI 2."
DVI
Changes the input to "DVI."
COMP./RGB
Changes the input to "COMPO./RGB"
VIDEO 1
Changes the input to "VIDEO 1."
VIDEO 2
Changes the input to "VIDEO 2."
EXT.SYNC
Changes the sync signal.
3G-B.DS
Selects the "3G SDI LEVEL B" data stream.
DUAL LINK
Turns on or off "SDI DUAL LINK."
A.MARKER
The area marker indication
S.MARKER
The safety marker indication
FRAME
Indication of the area of the specified aspect ratio
C.MARKER
The center marker indication
MARK.SEL
Selects the items of "MARKER"*
ASPECT
Changes the aspect ratio.
1:1
Displays in 1:1 mode.
STATUS
Status display*
4
L.METER
Audio level meter display
TIME CODE
Time code display
☞ "SOURCE ID" in "INFORMATION" on page 18
SOURCE ID
WAVE FORM
Wave form monitor display
VECTOR
Vector scope display
COLOR OFF
Color off
SCR CHECK
Screens check
I/P MODE
Change a mode according to a input picture.
MUTING
Muting on/off
DIMMER
Change the intensity of the button lamps.
– – –
No function
Opening
Short-circuiting
Green
Invalid
Invalid
Invalid
Invalid
Invalid
Invalid
Internal sync
External sync
DS 1
Off
Off
Off
Off
Off
3
Non-"R-" items
"R-" items
4:3
Off
☞ "On the Status Display" on page 7
*
5
Off
*
6
*
7
*
7
Color
Monochrome
*
8
*
9
Off
NORMAL
—
*
3
Selects which functions in "MARKER" are activated, non-"R-" items or "R-" items (☞ "MARKER" on page 13).
*
Displays the information shown when INPUT SELECT button of the current input is pressed (☞ "On the Status
4
Red
Display" on page 7). While controlling with the MAKE system, the information is displayed only at the moment of
short-circuiting.
Valid
*
5
While controlling with the MAKE system, the level meter is switched between displayed (short-circuiting) and
Valid
hidden (opening). When "LEVEL METER ch" is set to "OFF," the level meter is not displayed ("NO EFFECT"
Valid
appears).
While controlling with the TRIGGER system, the pattern of the audio channel display is switched.
Valid
*
6
While controlling with the MAKE system, the available set-up options will be the setting value currently selected
Valid
in "SOURCE ID" ("ON" or "AUTO" [short-circuiting]) and "OFF" (opening). While controlling with the TRIGGER
Valid
system, uses the same set-up option as those in the SET-UP MENU (☞ "SOURCE ID" in "INFORMATION" on
page 18).
*
7
While controlling with the MAKE system, the wave form monitor and vector scope is switched between
DS 2
displayed (short-circuting) and hidden (opening) regardless of the "AUTO OFF" setting in the MAIN MANU.
On
While controlling with the TRIGGER system, the screen is switched in the same way as when pressing the
On
SCOPE button (☞ e on page 6). If the wave form monitor and vector scope are input at the same time, the
wave form monitor is displayed.
On
*
8
While controlling with the MAKE system, the screen is switched between normal screen (opening) and blue
On
screen (short-circuiting). While controlling with the TRIGGER system, the screen changes in the same way as
On
when pressing SCREENS CHECK button (☞ q on page 6).
Must be controlled with the TRIGGER system. The mode changes in the order of "NORMAL" \ "CINEMA" \
*
9
"FIELD." (This function cannot be controlled with the MAKE system.)
16:9
On
• You cannot assign the same function to different pin terminals.
• The TRIGGER system switches each function by short-circuiting the pin terminal for about 1 second and
opening it.
On
On
DARK
—
21
ENGLISH