Technical Specification; Warranty - J.P. SELECTA 4002841 Manual De Instrucciones

MANUAL DE INSTRUCCIONES CODIGO 80196 REV B
J
.P. SELECTA s.a.u.
Octubre 2019
ERROR 7:
Causes: Probe damaged, triac of the shorted probe.
Action: The device warns and goes to rest immediately
ERROR 8:
THAN 70ºC, SOME PROBE IS ABOVE 80ºC
Causes: Probe damaged, triac of the shorted probe.
Action: The device warns and goes to sleep after a few seconds

9 Technical specification

Mains voltage:
(See plate)
Electrical power:
Maximum comsuption:
Fuses:
Power supply cord:
Weight (Net):
Dimensions: W x L x H
Thimbles size
Max working temperature
Solvent recovery:
Reproducibility:
Sound level:
Protection degree:
Ambient conditions:
Overvoltage category:
Pollution degree:
Glass material:
Carriage material:
Hosepipe material:
Number of programs:
"Boiling" extraction time:
"Rinsing" extraction time:
Solvent recovery time:

10 Warranty

The warranty covers the defective components or faulty assembling of the unit for 1
year since the purchasing date.
Keep purchasing bill as the only valid document for the purchasing date.
The warranty does not cover the damages caused for the unit malfunction. The unit
must be suitably qualified before being used for valuable samples processing.
Return goods are not accepted without previous J.P. SELECTA, s.a.u. approval.
Autovía A2 Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta @jpselecta.es - website: http://www.jpselecta.es
(Sujetas a modificaciones sin previo aviso)
SOME PROBE IS ABOVE 250ºC
IN OFF STATE AND WITH A MIDDLE TEMPERATURE LESS
230V 50/60Hz
Other power supply voltages could be
available (Ask to your dealer)
600W (6 places) 200W ( 2 places)
3 A
4 A fast. dimensions: 20x5 mm
Phase, Neutral, Earth (section 1mm
25 Kg
400x750x700 mm 400x450x700 mm
External diameter 26mm /height 60mm
80 to 240ºC
Better than 60% - 80%
Relative Standard deviation)< 1%
Lower than 40 dBA
IP55
Inner use.
Altitude up to 2000m
Temperature from 5ºC to 40ºC.
Relative maximum damp 80% for above
31ºC temperatures, decreasing linealy to
50% for 40ºC.
Category II
2
Borosilicate 3.3
Iron with overlap with RILSAN coating
chemical resistant.
Silicone.
15
from 0 to 999 min
from 0 to 999 min
from 0 to 99 min
Pag.: 40
1.5 A
19Kg
Tel 34 937 700 877 Fax 34 937 702 362
)
2