Jøtul F 305 Long legs Instrucciones Para Instalación página 9

Fig. 4
A
A
6. Install the height adjustment screws with plastic caps (A)
placed in the bag of screws.
7. Lift the oven from the pallet.
8. Set up the oven and adjust to the right height using the
height adjustment screws. NB: Take into account the
height of the floor plate. Mark on the wall if there has to
be a rear outlet for flue pipe and external air supply.
Fig. 5
B
9. Unscrew the screw (A). Use the washer (B) from the
bag of screws and screw it onto the burnchamber with
the same screw.
A
A
Fig. 6
A
1. Take the approval label (A) out of the ash pan and fasten
it with the nut (B), as displayed. The nut needs to be
tightened only with the fingers. NB: Do not cut off the
wire used for fastening the label.
ENGLISH
A
B
9