Fig. 40
A
9. Remove the old gasket (A) and clean the grooves. Glue
on a new gasket.
10. Install back all parts once all damaged gaskets have been
replaced.
Adjusting the door
Fig. 41
1. The door can be adjusted upwards or downwards slightly
on the door lock side by forcing it into correct position.
NB! The door cannot be fully closed when adjusting it!
8.0 Optional extras
8.1 Kit for outside air connection
Outside air connection, Ø80 mm - Cat. no. 51047509
Outside air connection, Ø 100 mm - Cat. no. 51012164
8.2 Soapstone top
Cat. no. 51048022
8.3 Ash lip for product with legs BP
Cat. no. 51047339
8.4 Protection grid for sweep ball
Cat. no. 151608 (Ø 150 mm)
8.5 Short legs
Cat. no. 51047318, BP
Cat. no. 51047340, WHE
ENGLISH
21