Adjusting To Daylight Saving Time; Changing The Display Position Of The Time/Date Display - Sony SVT-DL224 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Adjusting to Daylight Saving Time

You can adjust to Daylight Saving Time when the
season changes.
1
Press MENU, and the DAYLIGHT SET display
appears on the monitor screen.
<
DAYLIGHT SET
MODE
NO USE
WEEK
MONTH
ON 1ST-SUN 04
OFF LST-SUN 10
<
C L O C K S E T
1 0 - 1 5 - 9 7 W E D 1 5 : 2 0 : 0 0
2
Press DATA '/' to set MODE to NO USE or
USE:
NO USE: no Daylight Saving Time adjustment is
made
USE: Daylight Saving Time adjustment is made
<
DAYLIGHT SET
MODE
USE
WEEK
MONTH
ON 1ST-SUN 04
OFF LST-SUN 10
<
C L O C K S E T
1 0 - 1 5 - 9 7 W E D 1 5 : 2 0 : 0 0
3
Set the date and time the Daylight Saving Time
adjustment is made.
WEEK ON
Press DATA '/' to set which day the Daylight
Saving Time adjustment is made:
1ST, 2ND, 3RD, 4TH or LST for first, second,
third, fourth or last week.
Then press SHIFT b, and press DATA '/' to
select the day of the week:
SUN, MON, TUE, WED, THU, FRI or SAT
MONTH ON
Press DATA '/' to set which month the
Daylight Saving Time adjustment is made:
01, 02, 03, 04...1, 12 for January, February
.....December
TIME ON
Press DATA '/' to set the time the Daylight
Saving Time adjustment is made. The time can
only be set between 01 and 22.
Then press SHIFT b, and press DATA '/' to
set the minutes.
>
TIME
02:00
02:00
>
>
TIME
02:00
02:00
>
Following the same procedures as WEEK ON,
MONTH ON and TIME ON, set WEEK OFF,
MONTH OFF and TIME OFF when the time is
changed back from the Daylight Saving Time to
standard time.
4
Press PAUSE to return to the normal display.
Changing the Display Position of
the Time/Date Display
You can change the position of the time/date display
that appears on the monitor screen.
1
Turn on the power of the equipment to be used.
The normal display appears.
1 0 - 1 5 - 9 7 W E D 0 0 0
1 5 : 2 0 : 0 0
1 2
2
Change the display position as follows.
To move the display downwards, press SHIFT v.
(When the display reaches the bottom of the
screen, the display returns to the top of the screen.)
To move the display rightwards, press SHIFT b.
(When the display reaches the right-hand edge of
the screen, the display returns to the left-hand edge
of the screen.)
1 0 - 1 5 - 9 7 W E D 0 0 0
1 5 : 2 0 : 0 0
1 2
Note
While recording, this function does not work.
To turn off or on the screen display
Set the ON SCREEN switch to OFF or ON.
Date
Alarm count
Recording/
playback speed
Time
Press SHIFT b.
Press SHIFT v.
11

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido