Connections
Turn all the power off before making connections.
Connect the DC power cord last.
Connecting a Camera, Monitor
and Microphone
With the following connections, you can monitor the
picture and sound.
Microphone
to MIC IN
to DC
12V IN
to a DC
adaptor
or battery
to video
input
Monitor
Use of BNC connector
Align pin with cutout, insert and
turn right to lock.
To remove, turn left and pull out.
Note
When you connect the DC power source, be sure to
connect it with correct polarity.
To connect an alarm sensor
Refer to page 21.
8
to VIDEO IN
to VIDEO
OUT
to video output
Video camera
Connecting a Switcher
to SW
OUT
Video camera
to EXT
TIMING
IN
Camera switcher
Note
When you connect several cameras to a switcher,
synchronize the cameras.
If not, the picture will be disturbed.
to VIDEO
IN
Monitor
to MONITOR OUT