Sw Out Terminal - Sony SVT-DL224 Manual De Instrucciones

SW OUT Terminal

The VCR outputs a pulse signal from the SW (switch)
OUT terminal to the camera switcher to control the
switching from camera to camera.
COM terminal
SW OUT terminal
Specify the interval between each pulse signal on the
SW OUT display. Also, set TIMING to FIELD or
FRAME depending on the specifications of the camera
switcher.
Available settings are:
FIELD: 1, 2, 3, 4, 5, 10, 30, or 60 fields
FRAME: 1, 2, 3, 4, 5, 10, 30, or 60 frames
1
Press MENU until the SW OUT display appears on
the screen.
< >
SW OUT
F I ELD
T I M I NG
8 H
2
Set the interval by pressing DATA '/' and press
SHIFT b.
< >
SW OUT
F I ELD
T I M I NG
8 H
0 1
F I ELD
Y
0 4
F I ELD
Y
3
Set TIMING to FIELD or FRAME by pressing
DATA '/'.
< >
SW OUT
F I ELD
T I M I NG
8 H
4
Set 8H (8-hour mode) to Y (yes) or N (no) by
pressing DATA '/'.
Y (yes): a signal is output in the 8-hour mode
N (no): a signal is not output in the 8-hour mode
5
When you have completed the settings, press
PAUSE to return to the normal display.
0 4
F R A M E
Y
27