Changing The Default Contrast Setting; To Change The Default Contrast - HP LaserJet 3380 Manual De Instrucciones

Changing the default contrast setting

The contrast affects the lightness and darkness of an outgoing fax as it is being sent.

To change the default contrast

The default contrast is the contrast that is normally applied to items that are being faxed.
The slider is set to the middle as the default contrast setting.
1. Press
2. Use the
3. Use the
4. Use the
5. Use the
6. Press
34 Chapter 2 Faxing (basic)
/ .
MENU ENTER
< or the > button to select Fax setup, and then press
< or the > button to select Fax Send setup, and then press
< or the > button to select Def. Light/Dark, and then press
< button to move the slider to the left to make the fax lighter than the original, or
use the > button to move the slider to the right to make the fax darker than the original.
/ to save your selection.
MENU ENTER
/ .
MENU ENTER
/ .
MENU ENTER
/ .
MENU ENTER
ENWW