Safety Regulations; Explanation Of Symbols Used - Titan POWRMAX 605 Instrucciones De Uso

Pulverizador de textura
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

SAFETY PRECAUTIONS
1

SAFETY REGULATIONS

1.1

EXPLANATION OF SYMBOLS USED

This manual contains information that must be read and
understood before using the equipment. When you come to
an area that has one of the following symbols, pay particular
attention and make certain to heed the safeguard.
This symbol indicates a potential hazard
that may cause serious injury or loss of life.
Important safety information will follow.
This symbol indicates a potential hazard
to you or to the equipment. Important
information that tells how to prevent
Attention
damage to the equipment or how to avoid
causes of minor injuries will follow.
Danger of skin injection
Danger of injury from inhalation of harmful
vapors
Danger of electric shock
i
Notes give important information which
should be given special attention.
4
WARNING: PROTECTION OF
PERSONS
Spray materials can be harmful if inhaled or come
in contact with body. Vapors can cause severe
nausea, fainting, or poisoning.
PREVENTION:
Protective clothing, gloves and possibly skin protection
cream are necessary for the protection of the skin. Observe
the regulations of the manufacturer concerning coating
materials, solvents and cleaning agents in preparation,
processing and cleaning units.
Do not remove the mortar hose as long as it is under
pressure. Pay attention to the pressure gauge.
All local regulations regarding protection against
hazardous vapors must be observed.
Wear protective eyewear.
Do not point the spray lance at persons or animals.
Wear ear protection in order to protect your ears.
Wear safety shoes when transporting the machine or
working with it.
People not needed to assist with machine installation,
assembly or operation, must keep away from the machine.
The PowrMax 605 is equipped with an Emergency Stop
switch for emergency shutoff.
Breathing masks:
Make a breathing mask available to the operator in order to
protect against mineral dust.
WARNING: RISK OF INJURY DUE TO
ESCAPING MATERIAL
PREVENTION:
Before switching the unit on, always check that the
material tap on the spray lance is closed. Close material
tap whenever stopping work.
PowrMax

Publicidad

Tabla de contenido
loading

Tabla de contenido