J.P. SELECTA MP-2006 Manual De Instrucciones página 57

C． Dissolved Oxygen Measuring Part
a. Meter can measure Dissolved Oxygen's Concentration, Saturation and Electrode current.
b. With automatic temperature compensation function.
c. With calibration function which can make Zero Oxygen calibration, Full Scale calibration, Air
Pressure calibration and Salinity Compensation calibration.
D． Other Characteristic
1. Big 5.7'' touch screen for easy use.
2. Apart from ion concentration, meter allows to measure all parameters simultaneously. Of cause,
it also allows user to select necessary parameters for measuring.
3. Meter supports GLP:
a. Meter requests user to set operator number and then can record down the procedure of all user.
b. Can record down and print calibrating data.
c. Can store 200 sets measuring data in each of pH measuring data, Conductivity measuring data,
TDS measuring data, Salinity measuring data and Dissolved Oxygen measuring data if all are
meet GLP. Meter can also store 6 kinds of ion measuring value including corresponding pX
value and ion concentration value 100 sets of each.
4. Can view, print and delete measuring data
5. Can view the using parameter under current measuring mode as well as previous calibration
data.
6. There are three measuring modes: Continuous measuring mode, Timed Reading
mode and Balance Reading measuring mode to meet different user's measuring requirements.
7. With standard RS232 interface.
8. With electricity cut off protection function which can protect the stored measuring
calibrating data and set parameter to be saved when meter is turned off or abnormal electricity
cut off occurred.
measuring
data,
54