jbc TE 5400 Manual Del Usuario página 3

SPECIFICATIONS
The station TE 5400 is used for desoldering and
soldering of small and medium sized SMD's by
hot-air.
- TE 5400 230V
- TE 5400 120V
TE 5400 is also sold supplied without extractors
or protectors:
- TE 5400 230V WE
- TE 5400 120V WE
The station's components
- Control unit with heater 200W
- TE 8600 heater stand
- Extractor stand
- Set of 5 protectors.
- Set of 3 extractors.
- 2 tripods for the protectors.
- Set of 4 suction cups
- Suction tube with connectors Ref. 0932330
- 4 nozzles:
ø 2
ø 2,5
ø 3
ø 4
In order to make the nozzles removal easier, the
stand has a special bushing.
- Instruction manual
The pedal ref. 0964551 can be connected to
the connector placed at the rear of the station.
This article is not delivered with the station.
Control unit technical specifications
- Temperature selection from 150 to 450°C (300
to 850°F).
- Accuracy of selected temperature: ±5%.
Ref. 5400200 - Air flow regulation: 4-12 l/min.
- Station's maximum power: 225W.
Ref. 5400100
- ESD protected housing.
Typical surface resistance: 10
square.
Ref. 5410200
- Equipotential connector and the metallic part
Ref. 5410100
of the heating element are connected to
station mains ground supply for ESD
protection.
- Complies with CE standards on electrical
Ref. 0798600
safety, electromagnetic compatibility and
antistatic protection.
Ref. 0792800
- RoHS compliant.
- Weight of complete unit: 11.2 kg (28 lbs).
Ref. 0930110
Safety measures
Ref. 0990330
-
Ref. 0990350
-
Ref. 0990370
Ref. 0990410
-
-
Ref. 0002754
-
2
This product should not be thrown in the
garbage.
Incorrect use of this tool may cause fire.
Be cautious when using the tool in places
where inflamable products are stored.
Heat can cause fire to inflamable products
even when they are not in sight.
Do not use when the atmosphere is
explosive.
Place the tool back on its stand in order to
let it cool down before you store it.
ENGLISH
5 -10 11 Ohms/