SATA AE1017H Instrucciones De Uso página 61

中文
EN DE RU KO PT JA ES
AE1017H
Chapter VII Installation and Operation of Auxiliary Arm
As one of the most important auxiliary devices, the auxiliary arm can be attached to our 20" or above tire-changing machines
separately or in pairs to help separate hard rims and flat tires, as this task is very difficult or even impossible to complete manually, as
shown in Fig. 7-1.
7.1 Installation of left auxiliary arm (type II)
Power and air sources must be completely cut off before installation.
7.1.1
Take the auxiliary arm out of the packaging box and install the corresponding parts according to the drawings.
7.1.2 Handle the machine as shown below
Fix the auxiliary arm to the left side of the machine with a wrench and tighten the corresponding screws and nuts.
61