SATA AE1017H Instrucciones De Uso página 62

Chapter VIII Maintenance
8.1 Precautions
Maintenance shall only be performed by authorized personnel.
The daily maintenance described in the manual is necessary for the correct operation and long service life of the tire changer. Infrequent
maintenance may harm the operation and reliability of machine, and expose the operator or others to danger.
Disconnect the power and air sources before conducting any maintenance.
Faulty parts shall be replaced with the same original parts by a professional. It is strictly forbidden to remove or modify the safety
systems (pressure limiting valve and pressure regulating valve).
Disclaimer: The manufacturer assumes no liability for damage caused by the use of spare parts from other
manufacturers or the modification or removal of safety systems.
8.2 Maintenance
62
AE1017H
中文
EN DE
Clean the large plate with diesel and lubricate the
clamping jaw rail weekly to prevent dust accumulation.
Perform the following operations at least once per
month:
Fig. 8-1
Check the oil level in the lubricating oil cup. If necessary,
loosen the screw to fill the reservoir (Fig. 8-1) and only
lubricate the compressed air circuit with ISO VG viscous
lubricating oil (ISO HG).
Fig. 8-2
RU KO PT JA ES