Warning Mode Setting; Activate The Limit Setting; Checking The Upper And Lower Limit - Baxtran ADA Serie Manual De Instrucciones

16.1 WARNING MODE SETTING

The scale will display a warning when there is no object on the weighing pan or when the weight of the product is less than the
pre-defined lower limit value.
1. Press the key.
2. Press the key repeatedly until the message "InSpCT" is displayed.
3. Press the key and the display will show "SET HI".
4. Press the key repeatedly until "nOnrES" is displayed.
5. Press the key and the display will show "50" (the default value warns when the weight on the pan is less than 50% of
the lower limit value).
6. Press the key to increase the value or the
7. Enter the desired value, press
8. Press the key to confirm, and the display will show "SET HI".

16.2 ACTIVATE THE LIMIT SETTING

1. Press the key repeatedly until "EnABLE" is displayed.
2. Press the key to confirm.
3. To deactivate the limit setting, press the
4. Press the key to confirm, and the scale will return to the normal weighing mode.

16.3 CHECKING THE UPPER AND LOWER LIMIT

1. Press the key and the display will show "PrinT".
2. Press the key repeatedly until the message "InSpCT" is displayed
3. Press the key and the display will show "SET HI".
4. Press the key and the display will show the value of the upper limit.
5. Press the key and the display will show "SET HI" again.
6. Press the key and the display will show "SET LO".
7. Press the key and the display will show the value of the lower limit.
key to decrease it.
and the value will flash.
key until "dISAbL"is displayed
USER'S MANUAL ADA-APD EN EN
51