Chain Catcher; Right Hand Guard; Throttle Lockout; Vibration Damping System - Husqvarna 543 XP Manual De Instrucciones

Grasp the chain saw firmly, wrapping your fingers and
thumbs around the handles.
Apply full throttle and activate the chain brake by tilting
your left wrist forward onto the front hand guard. Do not let
go of the front handle. The chain should stop
immediately.

Throttle lockout

• Make sure the throttle control is locked at the idle
setting when the throttle lockout is released.
• Press the throttle lockout and make sure it returns to
its original position when you release it.
• Check that the throttle trigger and throttle lockout
move freely and that the return springs work properly.
• Start the chain saw and apply full throttle. Release the
throttle control and check that the chain stops and
remains stationary.
MAINTENANCE

Chain catcher

Check that the chain catcher is not damaged and is firmly
attached to the body of the chain saw.

Right hand guard

Check that the right hand guard is not damaged and that
there are no visible defects, such as cracks.

Vibration damping system

Regularly check the vibration damping units for cracks or
deformation.
Make sure the vibration damping units are securely
attached to the engine unit and handle unit.
–
English 31