Steelcase Answer Manual De Montaje página 12

®
For Parallel, Mirrored with Mid-Storage Support
(continued)
3.
Place the stanchions on the storage units with their open
sides facing inward (3a). Align the stanchion plate locating
notches with the pencil marks (3b). Mark all hole locations (3c)
and drill 1/8" diameter pilot holes through the laminate surface
only (hole depth only a 1/4") (3d). Secure each stanchion with
eight (8) 7/8" long pan head screws provided (3e).
3b
3a
CAUTION:
3c
DO NOT drill
deeper than 1/4"
3a
3e
3d
8x
1/4"
7/8"
(22.2mm)
Page 12 of 100
100137 Rev A