Steelcase Answer Manual De Montaje página 17

®
For Perpendicular, One-Sided with Mid-Storage Support
(continued)
3.
Place the stanchions on the storage unit with their open
sides facing inward (3a). Align the stanchions to the pencil
lines and flush to the side of the storage unit (3b). Mark all
hole locations (3c) and drill 1/8" diameter pilot holes through
the laminate surface only (hole depth only a 1/4") (3d).
Secure each stanchion with four (4) 7/8" long pan head
screws provided (3e).
FLUSH
FLUSH
3b
CAUTION:
DO NOT drill
deeper than 1/4"
3c
3a
3e
3d
1/4"
8x
Page 17 of 100
7/8"
(22.2mm)
100137 Rev A