Steelcase Answer Manual De Montaje página 7

®
For Parallel, One-Sided with Mid-Storage Support
(continued)
3.
Place the stanchions on the storage unit with their open
sides facing inward (3a). Align the stanchions to the pencil
lines and flush to the back of the storage unit (3b). Mark all
hole locations (3c) and drill 1/8" diameter pilot holes through
the laminate surface only (hole depth only a 1/4") (3d).
Secure each stanchion with four (4) 7/8" long pan head
screws provided (3e).
3b
(BACK OF STORAGE)
FLUSH
3a
CAUTION:
3c
DO NOT drill
deeper than 1/4"
3a
3e
3d
8x
1/4"
Page 7 of 100
100137 Rev A
7/8"
(22.2mm)