Steelcase Answer Manual De Montaje página 19

®
For Perpendicular, One-Sided with Mid-Storage
Support (continued)
7.
Align the inside face of the stanchion brackets to the
top cap lines and secure with the 1/2" long bolts provided.
TIP: Pencil lines on the outside of the stanchions can help
assembly by showing the stanchion bracket channel locations.
TIP: 3-3/8" and 8-1/4" long spacer blocks can be used to aid
in positioning the stanchion brackets.
8.
Carefully set the mid-storage onto the stanchion brackets
(8a) and mark the locations for the support brackets (8b).
Remove the mid-storage unit (8c).
9.
Using the support brackets as a gauge, mark their mounting
hole locations (9a) and drill 1/8" diameter pilot holes through the
laminate surface only (9b), (hole depth only a 1/4"). Secure
each mounting bracket with two (2) 1" long truss head screws
provided (9c).
8b
7
8a
8c
7
7
9a
9b
9c
TAPPED HOLE
BRACKET
CLEARANCE
HOLE BRACKET
1/4"
Page 19 of 100
100137 Rev A