Steelcase Answer Manual De Montaje página 24

®
For Perpendicular, Mirrored with Mid-Storage Support
(continued)
7.
Align the inside face of the stanchion brackets to the
top cap lines and secure with the 1/2" long bolts provided.
TIP: Pencil lines on the outside of the stanchions can help
assembly by showing the stanchion bracket channel locations.
TIP: 3-3/8" and 8-1/4" long spacer blocks can be used to aid in
positioning the stanchion brackets.
8.
Carefully set the mid-storage units onto the stanchion brackets
(8a) and mark the locations for the support brackets (8b).
Remove the mid-storage units (8c).
9.
Using the support brackets as a gauge, mark their
mounting hole locations (9a) and drill 1/8" diameter
pilot holes through the laminate surface only (9b),
(hole depth only a 1/4"). Secure each mounting bracket
with two (2) 1" long truss head screws provided (9c).
8b
7
8c
8a
7
7
CLEARANCE
HOLE BRACKET
9a
9b
9c
Page 24 of 100
100137 Rev A
TAPPED HOLE
BRACKET
1/4"