Steelcase Answer Manual De Montaje página 23

®
For Perpendicular, Mirrored with Mid-Storage Support
(continued)
4.
Locate the supports 2" from the front and back of the
storage unit (4a), and 1/32" back from the edge (4b).
Mark all hole locations and drill 1/8" diameter pilot holes
through the laminate surface only (hole depth only a 1/4").
Secure each support with four (4) 7/8" long pan head
screws provided.
5.
Determine the location of the end of the storage unit on
the beam.
6.
Put a pencil line on the beam top cap at 3-3/8" from the
end of the mid-storage location (6a), and a second pencil
line at 8-1/4" from the first line (6b).
2"
4a
2"
1/32"
4b
8-1/4"
6a
4b
1/32"
3-3/8"
END OF
6b
STORAGE
UNIT LINE
5
Page 23 of 100
100137 Rev A