Steelcase Answer Manual De Montaje página 18

®
For Perpendicular, One-Sided with Mid-Storage
Support (continued)
4.
Locate the supports 2" from the sides of the storage unit
(4a), and 1/32" back from the edge (4b). Mark all hole
locations and drill 1/8" diameter pilot holes through the
laminate surface only (hole depth only a 1/4"). Secure each
support with four (4) 7/8" long pan head screws provided.
5.
Determine the location of the storage unit on the beam.
6.
Put a pencil line on the beam top cap at 3-3/8" from the
end of the mid-storage location (6a), and a second pencil
line at 8-1/4" from the first line (6b).
2"
2"
4a
4b
1/32"
8-1/4"
6a
3-3/8"
6b
END OF
STORAGE
UNIT LINE
5
Page 18 of 100
100137 Rev A