Steelcase Answer Manual De Montaje página 22

®
For Perpendicular, Mirrored with Mid-Storage Support
(continued)
3.
Place the stanchions on the storage units with their open
sides facing inward (3a). Align the stanchion plate locating
notches with the side of the storage unit and align the side of the
stanchion plate with the pencil marks (3b). Mark all hole locations
(3c) and drill 1/8" diameter pilot holes through the laminate
surface only (hole depth only a 1/4") (3d). Secure each stanchion
with eight (8) 7/8" long pan head screws provided (3e).
3b
3a
CAUTION:
3c
DO NOT drill
deeper than 1/4"
3a
3e
3d
8x
1/4"
Page 22 of 100
7/8"
(22.2mm)
100137 Rev A