Steelcase Answer Manual De Montaje página 3

®
For Parallel, Centered (continued)
4.
Place the stanchions on the storage unit with their open
sides facing inward (4a). Align the stanchion plate locating
notches with the pencil marks (4b). Mark all hole locations (4c)
and drill 1/8" diameter pilot holes through the laminate surface
only (hole depth only a 1/4") (4d). Secure each stanchion with
eight (8) 7/8" long pan head screws provided (4e).
4b
4a
CAUTION:
4c
DO NOT drill
deeper than 1/4"
4a
4e
4d
8x
1/4"
7/8"
(22.2mm)
Page 3 of 100
100137 Rev A