Festo CPV GE-ASI-4 Serie Breve Descripción página 24

4.4 Connection example valve terminal type 10
1
AS−Interface master
2
Combination
powersupply from
Festo (electronically
safeguarded/short−
circuit proof )
3
Load voltage can be
switched off (see
section 4.2)
4.5 Converting the valve terminal
The valve terminal can be fitted with double−solenoid
and/or single−solenoid valves. During conversion, the new
valve terminal configuration must be set with the DIP
switches on the bottom of the electric sub−base.
1
DIP switch for the
valve configuration
on the bottom of the
sub−base
Permitted valve combinations and relevant DIP switch
settings see table in section 3.3.
24
1
2
3
Festo CPV..−GE−ASI−... 0802d English
1