Panel Filter - Nilfisk Advance Retriever 350B Instrucciones De Uso Y Despieces

Panel Filter for Dust Control
The dust filter shall filter the dusty air sucked by the fan, and therefore must always be kept in a clean condition.
NOTE: Every time the walk-behind sweeper raises dust while sweeping the filter is dirty and requires shaking / cleaning.
To clean the dust filter operate as follows:
1 Press button 4 rhythmically for about 10-15 seconds.
2 The vibrations detach the filter dust.
NOTE: Do not hold the push button constantly to avoid damage to the electrical system.
3 About once a month, for a better machine cleaning and dust control, remove filter 1 and clean it carefully by compressed air, or by a vacuum
cleaner.
For removing the filter operate as follows:
1 Remove the debris hopper.
2 Loosen the two wing nuts 2 and remove the filter holder 3.
3 Pull filter 1 out.
Fig. 6 - Panel Filter
1

Panel Filter

2 Wing Nut
3 Filter Holder
4 Shaker push button
5 Shaker Motor
1
2
19 - FORM NO. 041324 / RETRIEVER 350B
Abb. 6 - Tafelfilter
1 Tafelfilter
2 Flügelmutter
3 Filterschablone
4 Druckknopf für rüttlers
5 Rüttler
4
5
3
Fig. 6 - Filtre à Panneau
1 Filtre à panneau
2 Ecrou à papillon
3 Stoppeur pour filtre
4 Pommeau vibreur
5 Vibreur
Fig. 6 - Filtro de Panel
1 Filtro de panel
2 Tuerca de palomilla
3 Sujección del filtro
4 Pomo vibrador
5 Martillito vibrador