Summary - SATA AE5603 Manual Del Uso

Chapter One Summary
1.1 Definition and Technical Parameter of SATA Four Wheel Aligner
Definition:
To ensure the stability of straight driving and the ease of manipulation, to reduce the wear of automobile tires and other
parts, it is necessary to consider many factors to determine the angle of the wheel and the ground, to determine the
relative position of the installation between the steering vehicle wheesl, steering knuckle, front axle and the frame of
car. This adjustment to maintain a certain position called the s teering wheel alignment, also known as front wheel
alignment.
Previously the usual wheel alignment refers to the front wheel alignment, Now rear wheel alignment is also included,
hat is, four wheel alignment. Completely four-wheel alignment is to detect the angle and position in the X. Y. Z- axis b
etween car frame, suspension components, wheels, and between the four wheels. Accurately measure the vehicle by a
special instrument, then compare the measurement results to the original design standard parameter, adjust it to the
standard range to achieve the best handling and driving performance
1 Distance from front target plates to camera 1.8m~2.4m
2
3
4
5
Diagram of four-wheel alignment:
AE5603
Technical Parameter
Maximum Wheelbase 3m~3.6m
Wheel Tread Range 1.2m~2.3m
Wheel hub Dimension 10"~22"
Beam Height 1820mm~2180mm
39
- 03 -
EN DE RU KO PT
1.8-2.4m
3m~3.6m
1.2m~2.3m
10" - 22"
1,820mm~2,180mm
JA ES