View Instrument Information; Set Up Link2Sc - Hach Polymetron 9610sc SiO2 Operaciones

Element
LAST MEAS CHANNEL Last channel measured.
LAST MEAS TIME
LAST ABS
LAST CONC
NEXT MEAS TIME
DARK
REF
SAMPLE
DARK STD DEV
REF STD DEV
SAMPLE STD DEV
SAMPLE VOLUME
REAGENT 1
REAGENT 2
REAGENT 3

View instrument information

1. Select INSTRUMENT INFORMATION.
2. Select an option.
Option
ANALYZER INFO
MODULE INFO (option is available when a
module is installed)

Set up LINK2SC

The LINK2SC procedure is a secure method for the data exchange between process probes,
analyzers and LINK2SC-compatible laboratory instruments. Use an SD memory card for the data
exchange. Refer to the LINK2SC documentation on
the LINK2SC procedure.
1. Push menu and select LINK2SC.
2. Select an option.
Option
CREATE A NEW JOB Starts the grab sample operation for the measurement value exchange between the
JOB LIST
18 English
Table 3 Measurement data
Definition
Time of last measurement.
Last absorbance reading.
Concentration of last measurement.
Time the next measurement will be taken.
Number of A/D counts measured when the LED is turned off.
Reference A/D count used to compensate for natural color and turbidity.
A/D counts measurement (after color development) used to determine the
concentration of the sample.
Standard deviation of dark counts out of 6 readings.
Standard deviation of reference counts out of 6 readings.
Standard deviation of sample counts out of 6 readings.
Total sample flush volume through the colorimeter for the measurement cycle.
Calculated reagent delivery time to the sample based on temperature, pressure and
viscosity.
Calculated reagent delivery time to the sample based on temperature, pressure and
viscosity.
Calculated reagent delivery time to the sample based on temperature, pressure and
viscosity.
Description
analyzer and the laboratory.
Selects the job file to send the job to the laboratory or deletes the job. JOB TO LAB
—the analyzer data is sent to the SD card as a job file. ERASE JOB—deletes the
data.
Description
Shows the software information and serial number.
Shows the connected modules with software information
and serial number.
http://www.hach.com for a detailed description of