Features And Technical Specifications - EMAK PW 120C Manual De Istrucciones

training who is authorised to check, install and repair electrical equipment correctly and according to current
regulations in the country where the water cleaner is installed.
• Total Stop: this stops operation of the water cleaner every time the control lever on the cleaner gun is
released.
• Easy Start: this aids starting up the water cleaner by lowering the pressure for the fi rst moments of its
operation.
2 F T
EATURES AND
ELECTRICAL CONNECTION
Mains power supply
Absorbed power
Fuse
HYDRAULIC CONNECTION
Maximum inlet water temperature
Minimum inlet water temperature
Minimum inlet water fl ow
Maximum inlet water pressure
Maximum priming depth
PERFORMANCE
Water fl ow
Maximum pressure
Recoil of cleaner gun
Sound level
Operator arm vibrations
WEIGHT AND DIMENSION
Lenght x width x height
Weight
Detergent bottle capacity
All features and technical specifi cations are only indications. The Manufacturer reserves
2.1 I
DENTIFICATION OF
Please also refer to figures 1 to 2, which are located at the start of these operating and maintenance
instructions.
1 Electric power cord
2 Main switch
3 Handling bar
4 Housing for water gun / lance hose
5 Warning notice
6 Hose reel
7 Identifi cation plate
8 Water outlet connector
9 Housing for foaming lance
10 Lifting handle
11 Securfi x ring nut
12 Water inlet quick-fi t connector
13 Housing for electric power cord
14 Water gun
S
ECHNICAL PECIFICATIONS
PW 120C - IP 1200S
230 V / 1~50 Hz
1,6 kW
16 A
40 °C / 98 °F
5 °C / 41 °F
450 l/h / 120 US gph
0,8 MPa / 8 bar / 116 psi
0 m / 0 ft
360 l/h / 95 US gph
12 MPa / 120 bars / 1740 psi
11 N
76,2 dB (A)
0,73 m/s
12 kg / 26 lb
the right to modify the appliance as it deems necessary.
C
OMPONENTS
PW 135C - IP 1350S
230 V / 1~50 Hz
2,0 kW
16 A
40 °C / 98 °F
5 °C / 41 °F
500 l/h / 132 US gph
0,8 MPa / 8 bar / 116 psi
0 m / 0 ft
410 l/h / 108 US gph
14 MPa / 140 bars / 2031 psi
14 N
77,3 dB (A)
2 1,31 m/s
310 x 308 x 820 mm / 12 x 12 x 32 in
13 kg / 29 lb
0,35 l / 0,09 US gal
15 Lance hose PW 120C - IP 1200S version
16 Nozzle support head PW 120C - IP 1200S version
17 Nozzle cleaning pin
18 Rotojet rotating nozzle head (PW 135C - PW 145C
IP 1350S - IP 1450S only)
19 Foaming lance
20 Detergent intake adjuster
21 Opening for detergent
22 Water brush (PW 135C - PW 145C IP 1350S - IP 1450S only)
23 High pressure hose
24 Quick fi t connector for high-pressure hose
25 Safety catch on water gun lever
26 Water gun lever
27 Nozzle support head (PW 135C - PW 145C - IP 1350S - IP
1450S only)
28 Lance hose (PW 135C - PW 145C - IP 1350S - IP 1450S only)
PW 145C - IP 1450S
230 V / 1~50 Hz
2,3 kW
16 A
40 °C / 98 °F
5 °C / 41 °F
600 l/h / 159 US gph
0,8 MPa / 8 bar / 116 psi
0 m / 0 ft
480 l/h / 127 US gph
15 MPa / 150 bars / 2175 psi
15 N
77,3 dB (A)
2 1,31 m/s 2
13 kg / 29 lb
GB
19